RTW SurroundMonitor 11900 Series, Manual, Page: 295 / 376

EN-105 9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings
EN
SurroundMonitor 11900 Series
• GPIO 1 to 8
These check boxes are used to define the
GPIO outputs
being activated after selecting the corresponding Sub
Preset key in normal operation (to do this, press the
inS-
TR
key, press the
Input Sel
key and select a Sub Preset
from the Toolbar). More than one GPIO output can be se-
lected for each Sub Preset. As an example, two different
outputs (four discrete switching states) can be used to
activate or deactivate external instruments, applications or
system units. GPIO outputs used for alarm control signals,
as defined on the
Global GPIO Settings menu page, are
not available on the
Key 1
to
Key 7
menu pages. These
check boxes are greyed out instead.
• Close
This button closes the selected
Key
menu page and re-
turns you to the
Global Routing Settings
menu page
from which you selected the
Input Routing
.
Generally, the
Key 1
to
Key 7
menu tabs are divided into functional sections:
• Main settings
This section (upper left) is described in detail in the corre-
sponding chapter below.
• Decoder
This section (upper right) is described in detail in the cor-
responding chapter below.
• Metering Routing
This section (middle left) is described in detail in the cor-
responding chapter below.
• Lext/Rext Routing
This section (upper middle right) is described in detail in
the corresponding chapter below.
• Downmix Routing
This section (lower middle right) is described in detail in
the corresponding chapter below.