RTW SurroundMonitor 11900 Series, Manual, Page: 215 / 376

EN-25 6 | First Use | 6.7 | Changing Menu Settings
EN
SurroundMonitor 11900 Series
6.7 | changing Menu Settings
The menu system accesses all local parameters stored in presets as well as global settings that remain unchanged even after
loading new presets.
To change global settings, please proceed as follows:
1. From normal display operation, press the
Menu
key.
Accessing the menu for the first time after power on will
take some seconds for initialization.
2. Normally, the
instrument Settings
menu tab with the
instrument Settings
menu is shown first. But this menu
page exclusively includes the sub menus with the settings
of the
local parameters.
3. Therefore use the cursor keys < and > to select one of
the other menu tabs including the menu pages with the
global settings (independent from loaded preset).
4. Use the cursor keys
Ù
and
Ú
and the red
Sel
key or use
the mouse to make the required changes of the global
parameters.
5. For saving your settings and leaving the menu system
press the
Save & Exit
key. The screen shows the
Save
Global Settings?
page.
6. Confirm saving the global settings by again pressing the
Save & Exit
key. The unit stores the settings and returns
to normal operation mode.
7. For aborting your settings and leaving the menu system
without any changes repeatedly press the
Abort
key until
the unit returns to normal operation mode.
Cursor keys Cursor keys Function keys to save or to abort settings
Menu tabs with
global
parameters Menu tab with
local
parameters