RTW SurroundMonitor 11900 Series, Manual, Page: 261 / 376

EN-71 8 | Instruments (Display Modes) | 8.8 | The CAL Instrument
EN
SurroundMonitor 11900 Series
8.8.2.2 | LF-Test
Pressing the
LF-Test
button/key opens a new layer with the
functions for setting the LF test signal parameters
When you perform the test by selecting the corresponding
function (see below) a low-frequency signal (second layer) is
output to the LFE channel and all other speakers are muted.
When you select the same function again the noise signal
with the bandwidth shown in the bottom row is output to the
speakers set with the
Output
function (see below). Switching
back and forth between the two allows you to check the balan-
ce of the crossover frequencies and the best position for the
subwoofer.
First function layer
Press
MORE
button
for
Second function layer