ROBOTIQ CNC Machine Tending Kit Instruction Manual Download Page 40

Page: 40 / 144

Robotiq CN C M achine Tending Kit Instruction M anual

Features

Gripper activation

Icon

Functionality Name

Description

Gripper toolbar

Tap to toggle between the expanded and collapsed Gripper toolbar.
When greyed out, the functionality is not available.

UR+ Menu (Gripper
Toolbar)

Tap to toggle between the expanded (blue) and collapsed (black)
Gripper Toolbar.

Activate

Tap to activate the Gripper. The Gripper will fully open and close to set
the zero of the position value.

Emergency open

Slowly moves the Gripper to its fully closed position.

Emergency close

Slowly moves the Gripper to its fully open position.

Summary of Contents for CNC Machine Tending Kit

















































































































































Search results

Summary of Contents for CNC Machine Tending Kit

Reviews:

Related manuals for CNC Machine Tending Kit

Brands by name

Popular brands

ROBOTIQ CNC Machine Tending Kit, Instruction Manual

Search results

Summary of Contents for CNC Machine Tending Kit

Reviews:

Related manuals for CNC Machine Tending Kit

Brands by name

Popular brands