Rizzoli RV 100, Instructions Manual

Page: 82 / 132

ENGLISH
80
On every cooker it is possible to use a stain-
less steel plate cover, made to cover the
plate in the periods in which the cooker is
not used. In this way you obtain an uniform
desktop. The plate cover must be used with cold cooker. Before placing it, be sure that is
not present humidity, that the plate is clean
and that all the necessary maintenance is
done.
In RV 100 model, it is possible to request a
steel water basin to produce hot water for
domestic use. The basin is inserted in the up-
per part of the cooker, on the plate, in corre-
spondence of the fumes outlet. During the use, be sure that the water is always present
in the basin, otherwise it could be damaged.
The basin must not be completely full, leave
at least 4 cm between the water level and
the cover.
3.15 PLATE COVER (OPTIONAL)
3.16 WATER BASIN (OPTIONAL)
4. MAINTENANCE
The cooker works better if all its parts are
without combustion residuals, a clean cook-
er will be less exposed to problems due to wear. Cleaning frequency depends on how
much and how the cooker is used, as well as
on combustible quality.
4.1 CLEANING
Stainless steel parts have to be cleaned cold
with neutral detersives or with a specific
solution for stainless steel in case of hard
to remove dirt. Do not use at all abrasive
sponges that may scratch the surface. Dry
with a soft rag, following the glazing wise.
For enamelled or painted parts, do not use
abrasive or aggressive solution and in case
of stains pour some oil and wait while it ab-
sorbs the halo. Do not use aggressive or acid detersives.
In particular situations, after the installation
or with the cooking of meals, an oxidised
superficial stratus may be generated, in par-
ticular on the inox stainless steel frame. Also
in these situations, an accurate cleaning will
restore the state of the product as it was
new. On demand, Rizzoli can furnish specific
products for the cleaning of inox stainless
steel.
Every time you use the cooker you have to
clean the wood carrying grill before, at least
you have to clean the more rough deposits:
the holes of the grill should not be obstruct-
ed. To make this you can use the poker given
together with the cooker. If the grill is not well cleaned, the flame could not be well
feed and so you could experience an irregu-
lar combustion. If the grill is being removed,
it must be placed in its housing with the flat
part turned upwards.
4.2 CLEANING THE VISIBLE PARTS
4.3 GRILL CLEANING
WARNING! All these operations must be done with cold kitchen.