Rizzoli RV 100, Instructions Manual

Page: 72 / 132

ENGLISH
70
part of the house and make a direct connec-
tion with the air intake of the cooker. The
air intake of the cooker is located inside the
plinth in the same side of the combustion chamber. For the connection, we suggest to
use a flexible pipe and to prepare a device
for the eventual closure of the conduct.
Picture 11 - Installation with air intake in the room of installation and installation with air intake directly connected to
the wood fired cooker
Picture 12 - Possible connections of the air intake of the cooker
Air intake
not connected
Air intake
on the floor
Air intake external
on the wall
To make the connection easier we suggest
to make the external air intake on the floor
in correspondence with the internal part of
the plinth, or on the wall through the rear
part of the cooker according to specifies de-
pending on the model (see table n. 2 and
picture n. 13). Are also possible other solu- tions for the connection but they must be
decided together with Rizzoli.
Aspiring hoods or extracting air fans in the
room may generate problems to the device
if there is not a suited air intake or in case of
air intake sub-dimensioned.
WARNING! Aspiring hoods or extracting air fans in the room may generate
problems to the device if there is not a suited air intake or in case of air intake
sub-dimensioned.