Rizzoli RV 100, Instructions Manual

Page: 74 / 132

ENGLISH
72
The plinth of RV cookers can be regulated
in order to suite to the kitchen in which it
is inserted. It is possible to make the regula-
tion of the cooker’s height by operating on
the adjustable pins.
To make this you should remove the wood
box and regulate all the pins placed in the
plinth near the corners, in order to level
correctly the kitchen. To regulate the pins
you can use the hex key provided together
with the cooker. The pins have limited ex-
cursion and are made for fine regulations.
If it is necessary, you can use some linings under the plinth. It is possible to regulate
the plinth recess as to the cooker’s front. To
make this you have to remove the wood-box
and then you have to release the bolts that
that fix the plinth to the cooker, the bolts
are screwed vertically from low to up. Then
extract the wood box as to the new position
you want and then screw again the bolts. To
make this it is necessary an hexagonal key.
You have to pay attention not to remove
completely the bolts, you can just release
them according to all that is necessary.
2.12 REGULATION OF THE PLINTH
Picture 16 - Regulation of the height of the cooker and of the plinth’s recess as to the cooker’s body by the leveller pins
Picture 15 - Terminal board for the connection to the network: 1. Line 2. Neutral 3. Earth
1
2
3