Ricoh Leo-C2/P2, Technical Bulletin

Page: 296 / 308

T
echnical
B
ulletin
PAGE: 9/10
Model:
Leo-C2/P2
Date:
08-Apr-19
No.:
RD0A5040
17. Using the brush, apply the lubricant to the edge of the cleaning blade.
[A]: Minimum lubrication
[B]: Maximum lubrication
18. Confirm that both levers [A] are raised.
19. Push in the ITB cleaning unit along the rail until it comes in contact with the plate [A]
of the ITB unit.
20. Execute SP2-696-001 (Force Apply Lubricant - Belt Cleaning).
21. Close both front doors.
When toner near end or toner end is displayed on the operation panel, SP2-696-
001 (Force Apply Lubricant - Belt Cleaning) fails.
22. Wait for about 5 minutes until "Completed" is displayed on the operation panel.
23. Reset the counter for the replaced intermediate transfer belt.
24. Exit the SP mode and then turn the main power switch OFF.