Ricoh Leo-C2/P2, Technical Bulletin

Page: 162 / 308

T
echnical
B
ulletin
PAGE: 6/23
Model:
Leo-C2/P2
Date:
20-Mar-18
No.:
RD0A5025
Adjustment A:
For Semi-rough Paper (DC / High speed)
A-1. Select the paper in use from generic settings.

From the list of “Plain_Mid-roughness_Wt.1-8” select the weight in use. If the
paper already exists in the Paper Library, use that entry.

For black or color paper, make the following settings in Advanced Settings:
Value
White paper Black / Color paper
#1101-19 (Switch Paper Edge Detection
Sensor)
1
：
Normal 0
：
High Accuracy
#1331-06 (Paper Edge Detection) 3 4
A-2. Set the paper transfer current (belt-to-paper PTR DC bias) in the Advanced Settings
below according to the print mode; simplex or duplex, BW or FC or FCS or S, as
follows:
1) First, set the value to “0” and check the print quality. If acceptable, stop the
procedure. If unacceptable, continue.
2) Set the value to “5.” Again, stop or continue depending on the results.
3) Set the value to “10.” No further adjustments available. Stop the procedure by
applying the setting that produced the best results.
Advanced Settings
#1214-XX: Paper Transfer Output
#1214- 01 BW_Side 1
#1214- 02 BW_Side2
#1214- 03 FC_Side 1
#1214- 04 FC_Side 2
#1214- 05 FCS_Side 1
#1214- 06 FCS_Side 2
#1214- 07 S_Side 1: Clear/Special
#1214- 08 S_Side 1: White
#1214- 11 S_Side 2: Clear/Special
#1214- 12 S_Side 2: White
PTR DC Bias
1214-XX
0
5
10
Note the risk of Jams 31, 97 and 98 when set to the above values for black/ color papers.