Ricoh Leo-C2/P2, Technical Bulletin

Page: 106 / 308

T
echnical
B
ulletin
PAGE: 2/9
Model:
Leo-C2/P2
Date:
2-Jul-18
No.:
RD0A5021
The following notes and tables are referred to in the flowcharts. (Tables are described on
the next page.)
Note 1 : Corresponds to SP1-133-031 [Fusing Belt Smoothing Roller: Uneven Gloss Manual
Refresh].
Note 2 : Enabling the automatic fusing belt smoothing operation will periodically smoothen
the belt after printing a certain volume.
Note 3 : The more frequent the belt smoothing operation is run, the more frequent the belt
smoothing roller must be replaced.
Note 4 : Try the setting in the following order: Normal (Off)

Frequent

More Frequent

Most Frequent
Note 5 : Recommended maximum number pages per job by setting are as follows: 2000
pages for ‘Frequent’, 600 pages for ‘More Frequent’ and 400 pages for ‘Most
Frequent.’
Note 6 : The belt smoothing operation takes about 2 minutes at maximum.
Note 7 : Good fuseability meets the following conditions: a) printed image is not peeled off,
b) image does not peel off even if slightly scratched with finger nails, c) image
does peel off even if rubbed with non-linen cloth.
Note 8 : Approximate productivity by model (A4 LEF):
85ppm model – High 85ppm, Middle 69ppm Low 40ppm
95ppm model – High 95ppm, Middle 79ppm Low 40ppm