manualshive.com logo in svg

Ricoh fax3900l, Operating Instructions Manual, Page: 173 / 194

Share
Download
Ricoh fax3900l Operating Instructions Manual Download Page 173

Machine Environment

153

10

D

Attach the memory card cover to
the back left of the machine.

E

Turn the power switch on.

Installing The Optional 
Handset

A

Remove the information card from
the holder.

B

Attach the holder to the bracket
with the two screws provided.

Screw in firmly but not too tightly
(using an item such as a small coin).

Note

❒

The bracket and screws are in-
cluded with the fax machine.
The holder is included with the
optional handset.

C

Replace the information card.

D

Fix the bracket to the protruding
plastic hook on the rear left of the
machine.

E

Plug the handset jack into the
“TEL1” socket at the rear of the
machine.

ZCKP080N.eps

ZCKP010N.eps

ZCKP020N.eps

ZCKP030N.eps

ZCKP040N.eps

ZCKP050N.eps

Smt4EN-Ad-F_FM.book  Page 153  Friday, December 8, 2000  3:42 PM

Printed Matters

Summary of Contents for fax3900l



































































































































































































Reviews:

No comments