Ricoh fax3900l, Operating Instructions Manual, Page: 133 / 194

ISDN G3/G4
113
7
❖ ❖ ❖ ❖
Programming I-G3 SPID (I-G3 Own
Number 2)
When you have two units connect-
ed to the same line, enter the I-G3
SPID number.
If "ISDN Directory Number Select
(SPID)" in the User Parameters is
turned off, the display shows "I-G3
Own Number 2" instead of "I-G3
SPID". These settings are identical.
❖
❖ ❖
❖
Programming the I-G3 Sub-address
When multiple terminals (faxes,
digital phones, and so on) are con-
nected to the same line, program a
sub-address for each terminal.
Note
❒
You can enter up to 4 digits.
❒
You can enter numbers from 0
to 9999.
Storing ISDN Telephone
Numbers
You must be careful to select the correct
signaling type (Group 3 or Group 4) when
dialing, or when storing a telephone
number as a Quick Dial or Speed Dial.
To register G4 Terminal ID, perform
the following procedure.
A
Make sure that the machine is in
standby mode.
B
Press the
{{{{
User Tools
}}}}
key.
C
Press
0
0 0
0
or
1
1 1
1
to display "4. Key
Op. Tools".
User Tools Main Menu
4.Key Op. Tools
hi
D
Press the
{{{{
OK
}}}}
key.
E
Press
{{{{
2
}}}}{{{{
2
}}}}{{{{
2
}}}}{{{{
2
}}}}
, and then
press the
{{{{
OK
}}}}
key.
F
Press
0
0 0
0
or
1
1 1
1
to display "17.
ISDN G3 / G4".
Key Op. Tools:
17.ISDN G3/G4
hi
G
Press the
{{{{
OK
}}}}
key.
To register G4 Terminal ID
A
Confirm that "1. G4 Terminal
ID" is displayed.
ISDN G3/G4:
1.G4 Terminal ID
hi
B
Press the
{{{{
OK
}}}}
key.
C
Enter your country code.
If you make a mistake, press the
{
Clear
}
key and try again.
CountryCode:Press OK
[0000]
D
Press the
{{{{
OK
}}}}
key.
E
Enter the fax number.
If you make a mistake, press the
{
Clear
}
key and try again.
Fax Number: Press OK
[012345678901]
F
Press the
{{{{
OK
}}}}
key.
G
Enter the name.
If you make a mistake, press the
{
Clear
}
key and try again.
Name:[ABC] OK
[ABC COMPANY_
kkkkkk
]
H
Press the
{{{{
OK
}}}}
key.
G4 Terminal ID is registered.
Smt4EN-Ad-F_FM.book Page 113 Friday, December 8, 2000 3:42 PM
Printed Matters