Ricoh fax3900l, Operating Instructions Manual, Page: 127 / 194

Line Type
107
7
Line Type
You must register the Line Type be-
fore you connect the machine to the
line.
Note
❒
By default, Line Type is set to
"Tone".
❒
This setting has no effect if you fax
machine is connected to only an
ISDN line.
Limitation
❒
This function will not work if your
machine is connected to ISDN
only.
• If you do not correctly set the
Line Type, you will be able to
receive messages, but you may
not be able to send them.
• If you do not know the type of
line you are connected to, select
"Tone" and dial a trial number.
If the connection was success-
ful, your Line Type is "Tone", if
it did not, set the Line Type to
"Pulse" and dial a trial number.
If the connection was success-
ful, your Line Type is "Pulse".
To register the Line Type, perform the
following procedure.
Note
❒
You can edit the registered Line
Type by performing the steps for
registering the Line Type in the fol-
lowing procedure.
A
Make sure that the machine is in
standby mode.
B
Press the
{{{{
User Tools
}}}}
key.
C
Press
0 0 0 0
or
1 1 1 1
to display "4. Key
Op. Tools".
User Tools Main Menu
4.Key Op. Tools
hi
D
Press the
{{{{
OK
}}}}
key.
E
Press
{{{{
2
}}}}{{{{
2
}}}}{{{{
2
}}}}{{{{
2
}}}}
, and then
press the
{{{{
OK
}}}}
key.
F
Press
0 0 0 0
or
1 1 1 1
to display "13. Line
Type".
Key Op. Tools:
13.Line Type
hi
G
Press the
{{{{
OK
}}}}
key.
H
Press
0
0 0
0
or
1
1 1
1
and select "Tone" or
"Pulse".
Line Type:
hi
/OK
Pulse [Tone]
I
Press the
{{{{
OK
}}}}
key.
J
Press the
{{{{
User Tools
}}}}
key.
The machine returns to standby
mode.
Smt4EN-Ad-F_FM.book Page 107 Friday, December 8, 2000 3:42 PM
Printed Matters