Introduction: Initial Configuration
American Science and Engineering, Inc.
3-34
MINI
Z
Operator Manual 342-9000-1 Rev. B ECCN EAR99
3. To select a WiFi transmission standard, tap the
WiFi Region
text field. The WiFi Region list
opens, displaying a list of WiFi jurisdictions
4. Locate the region corresponding to the current location, and tap that listing. The menu closes, and
the listing is assigned.
3.6.3.3
Configuring the WiFi Frequency
The WiFi transceivers can be configured to use two alternative transmission frequency bands: the
default 2.4 GHz band, and the 5.0 GHz band.
To detect 5.0 GHz band WiFi signals, the tablet must be set to detect that frequency range, as described
in
Section 3.7.4
. When 5.0 GHz detection is enabled, the user can interactively choose between
2.4 GHz and 5.0 GHz using the procedure described in this section.
Selection between the two bands is done by the user and depends on local conditions and the use of the
bands by other WiFi users. Selection is persistent between sessions, and is stored in the scanner unit.
When the 5.0 GHz band is selected, “–5G” is appended to the SSID shown in the WiFi Connection
List.
1. In the tablet
Home Screen
, tap the
Settings
button
. The
Settings
screen opens.
2. At the top corner of the touchscreen, tap the
General
button. The Settings General mode screen
opens (shown in
Figure 5-11
).
3. To select a WiFi transmission frequency range, tap the
WiFi Frequency
text field. A dropdown
menu appears.
If the WiFi region list will not open, ensure that the Scanner is turned on and linked to this
tablet
