User Accounts: Changing Passwords
American Science and Engineering, Inc.
10-4
MINI
Z
Operator Manual 342-9000-1 Rev. B ECCN EAR99
•
For Strong password protection, the passwords must contain:
•
8 to 14 characters (case-sensitive)
•
At least one upper case letter (A-Z)
•
At least one lower case letter (a-z)
•
At least one numeric character (0-9)
•
At least one special character: @ ” ! # $ % ’( )* + , - . / : ; < = > ?[ \ ]^ _`{ | } ~
•
No more than two numbers together
•
No character repeated together
•
No three consecutive letters or numeric characters
(whether in ascending or descending order)
•
No blank spaces
•
Not the account User Name (the login account identifier used in this system)
10.4
Changing Passwords
For security reasons, the ASEInspection Software user account passwords are usually configured to
require changing periodically (see
Section 10.7
). When the time has come to change a password, the
ASEInspection Software displays a notice on the login screen the next time the user attempts to log in.
Both supervisor accounts and Operator accounts may change passwords at any time sooner than the
mandatory time limit. The Change Password screen appears as in
Figure 10-3
.
To change the user account password, perform the following steps:
1. In the
Home Screen
, near the top corner, tap the
Change Password
button
.
Figure 10-2:
Change Password
button (1), located at the top of the
Home screen.
1
