Scan Procedure: Normal Startup
American Science and Engineering, Inc.
6-4
MINI
Z
Operator Manual 342-9000-1 Rev. B ECCN EAR99
4. Power-on the tablet: on the tablet left side, press the Power button
for less than 2 seconds
of time.
5. The tablet initializes, and by default opens the ASEInspection™ Software
Home Screen
. If the
system is configured to require a login, complete the login screen (see
Section 10.1
).
6. Power-on the scanner. To do so, insert the key and turn it to the On position (“|,”).
7. Connect the tablet and scanner:
a.
If the Ethernet cable is being used, connect it (see
Section 3.3.1
).
b. Otherwise, select the scanner WiFi transceiver, as follows:
•
In the lower corner of the tablet screen, tap the WiFi Connection button
to open a
list displaying available scanner connections. The scanner must be powered-on to be
detected.
•
Tap the text link matching the target scanner to highlight it. The links display the serial
number of the Scanner, found on the label on the bottom of the scanner housing.
After a few moments, when the connection is established, the list subscreen closes
automatically, and the status indicator LED
on the scanner changes to steady yellow.
6.1.1
Scanner Unit Warm-Up
This section describes warm-up of the scanner unit, which is necessary if no scan has been performed
in the previous 12 hours (including if the scanner unit has been on, but without scanning). If Warm-up
is required, this icon
appears at the bottom of the tablet screen, indicating that a warm-up of 25
seconds of time is required. Otherwise, the system is ready for scanning; skip to
Section 6.1.2, Scan-
ning.
