LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
624
User Manual 1173.9628.02 ─ 16
Parameters:
<ModStatistics>
Statistical length in slots
Range:
1 to 1000
*RST:
20
<ModEnable>
OFF | ON
Enable or disable the measurement of modulation results
ON
: Modulation results are measured according to the other
enable flags in this command. Modulation results for which there
is no explicit enable flag are also measured (e.g. I/Q offset, fre-
quency error and timing error).
OFF
: No modulation results at all are measured. The other
enable flags in this command are ignored.
*RST:
OFF
<EVMenable>
OFF | ON
Enable or disable measurement of EVM
*RST:
OFF
<MagErrorEnable>
OFF | ON
Enable or disable measurement of magnitude error
*RST:
OFF
<PhaseErrEnable>
OFF | ON
Enable or disable measurement of phase error
*RST:
OFF
<IBEenable>
OFF | ON
Enable or disable measurement of inband emissions
*RST:
OFF
<EqSpFlatEnable>
OFF | ON
Enable or disable measurement of equalizer spectrum flatness
results
*RST:
OFF
<ModScheme>
AUTO | QPSK | Q16 | Q64
Modulation scheme used by the LTE uplink signal
AUTO
: automatic detection
QPSK
: QPSK
Q16
: 16-QAM
Q64
: 64-QAM
*RST:
QPSK
Example:
See
Firmware/Software:
V2.0.10
Options:
R&S CMW-KM012
Command Reference
深圳德标仪器
135-1095-0799