LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
318
User Manual 1173.9628.02 ─ 16
Parameters:
<RXConnector>
RF1C | RF2C | RF3C | RF4C | RFAC | RFBC
RF connector for the input path
<RXConverter>
RX1 | RX2 | RX3 | RX4
RX module for the input path
<TX1Connector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the first output path
<TX1Converter>
TX1 | TX2 | TX3 | TX4
TX module for the first output path
<TX2Connector>
RF1C | RF1O | RF2C | RF3C | RF3O | RF4C | RFAC | RFAO |
RFBC
RF connector for the second output path. Select different con-
nectors for the two paths.
<TX2Converter>
TX1 | TX2 | TX3 | TX4
TX module for the second output path. Select different modules
for the two paths.
Firmware/Software:
V3.2.80
Options:
R&S CMW-KS510, R&S CMW-KS520, R&S CMW-KS521, R&S
CMW-KE100, R&S CMW-KE500 and R&S CMW-KE501
Manual operation:
See
ROUTe:LTE:SIGN<i>:SCENario:CATF[:EXTernal]
<RXConnector>, <RXConverter>,
<PCCTXConnector>, <PCCTXConverter>, <PCCIQConnector>,
<SCC1TXConnector>, <SCC1TXConverter>, <SCC1IQConnector>
Activates the scenario "2CC CA - Fading - 2 RF Out" with external fading, using one
RF input path, one PCC RF output path and one SCC RF output path. Selects the RF
connectors, RX/TX modules and digital I/Q output connectors to be used. To query the
active scenario, use
Depending on the installed hardware and the active sub-instrument or instance <i>
only a subset of the described parameter values is allowed. The *RST values and the
mapping of virtual connector names to physical connectors also depend on the active
sub-instrument or instance <i>.
All instruments are equipped with the RF 1 and RF 2 connectors and one RX and TX
module. Additional RF connectors and RX/TX modules are optional.
See also: "Signal Path Settings" in the R&S
CMW user manual, chapter "Remote Con-
trol"
Connector names:
●
RF1C | RF2C | RF3C | RF4C | = RF 1 COM to RF 4 COM, front panel
●
RFAC | RFBC = virtual names for the RF COM connectors
Command Reference
深圳德标仪器
135-1095-0799
