LTE Signaling
R&S
®
CMW-KM5xx/-KS5xx
197
User Manual 1173.9628.02 ─ 16
RLC Throughput (Softkey)
The softkey shows the current measurement state. Additional measurement substates
can be retrieved via remote control.
Remote command:
2.4.19.2
RLC Throughput Tab
The tab shows the measurement results in a diagram and a table. The connection sta-
tus information displayed at the bottom is the same as in the LTE signaling main view.
The most important settings of the "LTE signaling" application can be accessed via the
"Signaling Parameters" softkey and the related hotkeys.
To switch to the signaling application, press the "LTE Signaling" softkey two times.
The "Config" hotkey opens either the configuration dialog of the measurement or the
configuration dialog of the signaling application, depending on which softkey is active.
Fig. 2-89: RLC throughput tab
GUI Reference
深圳德标仪器
135-1095-0799