LTE PRACH Measurement
R&S
®
CMW-KM5xx/-KS5xx
808
User Manual 1173.9628.02 ─ 16
<13_PErrPeakLow>
<14_PErrPeakHigh>
Phase error peak value for low and high EVM window position
Range:
-180 deg to 180 deg (AVERage: 0 deg to 180 deg,
SDEViation: 0 deg to 90 deg)
Default unit: deg
<15_FreqError>
Carrier frequency error
Range:
-80000 Hz to 80000 Hz
Default unit: Hz
<16_TimingError>
Transmit time error
Range:
-32000 Ts to 32000 Ts
Default unit: Ts (basic LTE time unit)
<17_TXpower>
User equipment power
Range:
-100 dBm to 55 dBm
Default unit: dBm
<18_PeakPower>
User equipment peak power
Range:
-100 dBm to 55 dBm
Default unit: dBm
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.10
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
FETCh:LTE:MEAS<i>:PRACh:MODulation:EXTReme?
READ:LTE:MEAS<i>:PRACh:MODulation:EXTReme?
CALCulate:LTE:MEAS<i>:PRACh:MODulation:EXTReme?
Returns the extreme single value results.
The values described below are returned by
FETCh
and
READ
commands.
CALCulate
commands return limit check results instead, one value for each result listed below.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
<2_OutOfTol>
Out of tolerance result, i.e. percentage of measurement inter-
vals of the statistic count (
) exceeding the specified modulation lim-
its.
Range:
0 % to 100 %
Default unit: %
Command Reference
深圳德标仪器
135-1095-0799
