LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
690
User Manual 1173.9628.02 ─ 16
Suffix:
<no>
.
1..1000
Return values:
<Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
<SegReliability>
Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.
<StatistExpired>
Reached statistical length in slots
Range:
0 to 1000
<OutOfTolerance>
Percentage of measured subframes with failed limit check
Range:
0 % to 100 %
Default unit: %
<RBindex>
Resource block index of margin
Range:
0 to 99
Example:
See
Usage:
Query only
Firmware/Software:
V2.0.10
V2.1.25: increased maximum number of segments to 250
V2.1.30: increased maximum number of segments to 512
V3.0.50: increased maximum number of segments to 1000
Options:
R&S CMW-KM012
FETCh:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:ESFLatness:CURRent?
FETCh:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:ESFLatness:AVERage?
FETCh:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:ESFLatness:EXTReme?
FETCh:LTE:MEAS<i>:MEValuation:LIST:SEGMent<no>:ESFLatness:SDEViation?
Return equalizer spectrum flatness single value results for segment <no> in list mode.
Suffix:
<no>
.
1..1000
Return values:
<1_Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
<2_SegReliability>
Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.
Command Reference
深圳德标仪器
135-1095-0799
