LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
646
User Manual 1173.9628.02 ─ 16
The settings apply to all channel bandwidth combinations that are not supported by
.
Suffix:
<no>
.
1..2
Selects first or second adjacent UTRA channel
Parameters:
<RelativeLevel>
Range:
-256 dB to 256 dB
*RST:
32.2 dB (<no> = 1) / 35.2 dB (<no> = 2)
Default unit: dB
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
<AbsoluteLevel>
Range:
-256 dBm to 256 dBm
*RST:
-50 dBm
Default unit: dBm
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Example:
See
Firmware/Software:
V3.2.70
Options:
R&S CMW-KM502/-KM552 for FDD/TDD
CONFigure:LTE:MEAS<i>:MEValuation:LIMit:ACLR:EUTRa:CAGGregation:
CBANdwidth<Band1>:CBANdwidth<Band2>
<RelativeLevel>,
<AbsoluteLevel>
Defines relative and absolute limits for the ACLR measured in an adjacent E-UTRA
channel.
The settings are defined separately for each channel bandwidth combination of the
aggregated channels.
Suffix:
<Band1>
.
150,200
First channel bandwidth in 0.1 MHz
<Band2>
100,150,200
Second channel bandwidth in 0.1 MHz
For <Band1> = 150, only <Band2> = 150 is allowed
For <Band1> = 200, all <Band2> values are allowed
Parameters:
<RelativeLevel>
Range:
-256 dB to 256 dB
*RST:
29.2 dB, ON
Default unit: dB
Additional parameters: OFF | ON (disables the limit check | ena-
bles the limit check using the previous/default limit values)
Command Reference
深圳德标仪器
135-1095-0799
