manualshive.com logo in svg

R&S CMW-KM5 Series, User Manual

Share
Download
R&S CMW-KM5 Series User Manual Download Page 213

LTE Signaling

R&S

®

CMW-KM5xx/-KS5xx

213

User Manual 1173.9628.02 ─ 16

2.4.20.10

FDD/TDD Additional E-UTRA Capabilities

The capability report sections "fdd-Add-UE-EUTRA-Capabilities" and "tdd-Add-UE-
EUTRA-Capabilities" are only relevant for UEs that support both FDD and TDD.

In that case, the previous sections contain information that applies to FDD and TDD.
Features that are indicated as supported are supported in both modes.

The additional section "fdd-Add-UE-EUTRA-Capabilities" contains a subset of the
parameters described in the previous sections. If a feature is listed as supported, it
means that this feature is only supported for FDD but not for TDD.

The additional section "tdd-Add-UE-EUTRA-Capabilities" contains the same subset of
parameters. If a feature is listed as supported, it means that this feature is only suppor-
ted for TDD but not for FDD.

Fig. 2-100: Additional FDD/TDD-only capabilities

For the description of the individual parameters, refer to the previous sections. The
remote control commands for the additional sections are also referenced there.

2.5 Programming

The following sections provide programming examples for the LTE signaling applica-
tion.

The examples contain SCPI commands supported by the R&S

 

CMW and the following

symbolic scripting commands:

●

// <comment>

:

A <comment> ignored by the used programming tool

●

WHILE <query> <> <value>

:

Waits until the <query> returns a certain <value>, e.g. a specific state is reached.

●

WAITKEY <message>

:

Displays a dialog box with a <message> and waits until the box is closed by the
user.

See also: "Remote Control" in the R&S

 

CMW user manual

 

 

Programming

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KM5 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands