R&S CMW-KM5 Series, User Manual

Page: 621 / 856

LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
621 User Manual 1173.9628.02 ─ 16
<Frequency> Center frequency of the RF analyzer for the segment
Range:
70E+6 Hz to 6E+9 Hz
*RST: 1.95E+9 Hz
Default unit: Hz
<ChBandwidth> B014 | B030 | B050 | B100 | B150 | B200
Channel bandwidth used in the segment
B014 : 1.4 MHz
B030 : 3 MHz
B050 : 5 MHz
B100 : 10 MHz
B150 : 15 MHz
B200 : 20 MHz
*RST: B200
<CyclicPrefix> NORMal | EXTended
Type of cyclic prefix used in the segment
*RST:
NORM
<ChannelType> AUTO | PUSCh | PUCCh
AUTO : automatic detection of channel type
PUSCh : only PUSCH in measured subframe
PUCCh : only PUCCH in measured subframe
*RST: PUSC
<RetriggerFlag> OFF | ON | IFPower
Specifies whether the measurement waits for a trigger event
before measuring the segment, or not.
For the first segment, the value OFF is always interpreted as
ON.
For subsequent segments, the retrigger flag is ignored for trigger
mode ONCE and evaluated for trigger mode SEGMent, see
TRIGger:
​
LTE:
​
MEAS<i>:
​
MEValuation:
​
LIST:
​
MODE
​
on page 627.
OFF : measure the segment without retrigger
ON : wait for a trigger event from the trigger source configured
via
TRIGger:
​
LTE:
​
MEAS<i>:
​
MEValuation:
​
SOURce
​
on page 628
IFPower : wait for a trigger event from the trigger source "IF
Power"
*RST:
ON
<EvaluatOffset> Number of subframes at the beginning of the segment that shall
not be evaluated
Range:
0 to 1000
*RST: 0
Command Reference
深圳德标仪器
135-1095-0799