R&S CMW-KM5 Series, User Manual

Page: 580 / 856

LTE Multi Evaluation Measurement
R&S
®
CMW-KM5xx/-KS5xx
580 User Manual 1173.9628.02 ─ 16
FETCh:LTE:MEAS:MEValuation:LIST:ESFLatness:MAXR2:AVERage?
FETCh:LTE:MEAS:MEValuation:LIST:ESFLatness:SCINdex:MINimum1:CURRent?
// *****************************************************************************
// Return selected spectrum emission and ACLR results.
// *****************************************************************************
FETCh:LTE:MEAS:MEValuation:LIST:SEMask:OBW:AVERage?
FETCh:LTE:MEAS:MEValuation:LIST:SEMask:TXPower:MAXimum?
FETCh:LTE:MEAS:MEValuation:LIST:SEMask:MARGin:AREA5:NEGativ:MINimum?
FETCh:LTE:MEAS:MEValuation:LIST:ACLR:EUTRa:AVERage?
FETCh:LTE:MEAS:MEValuation:LIST:ACLR:EUTRa:NEGativ:AVERage?
FETCh:LTE:MEAS:MEValuation:LIST:ACLR:UTRA2:POSitiv:AVERage?
// *****************************************************************************
// Return detected allocation, modulation scheme and channel type of the
// last slot within the statistical length of the modulation measurement.
// *****************************************************************************
FETCh:LTE:MEAS:MEValuation:LIST:MODulation:DALLocation?
FETCh:LTE:MEAS:MEValuation:LIST:MODulation:DMODulation?
FETCh:LTE:MEAS:MEValuation:LIST:SEMask:DCHType?
// *****************************************************************************
// Return the individual segment reliability indicators
// *****************************************************************************
FETCh:LTE:MEAS:MEValuation:LIST:SRELiability?
3.5 Command Reference
The following sections provide detailed reference information on the remote control
commands of the "LTE Multi Evaluation" measurement and the general commands
applicable to all LTE measurements.
● Conventions and General Information .................................................................. 580
● General Measurement Settings ............................................................................ 584
● Multi Evaluation Measurement Commands .......................................................... 595
● Combined Signal Path Commands .......................................................................726
3.5.1 Conventions and General Information
The following sections describe the most important conventions and general informa-
tions concerning the command reference.
3.5.1.1 MEAS<i>
MEAS<i> is used as abbreviation of "MEASurement<instance>". For better readability
only the abbreviated form (which is also accepted by the instrument) is given in the
command reference.
Command Reference
深圳德标仪器
135-1095-0799