RADWAG PM 10.C32, User Manual

Page: 110 / 129

- 110 -
COMMANDS OVERVIEW
Zero Balance
Format: Z CR LF
Response options:
Z_A CR LF - command understood and in progress
Z_D CR LF command carried out
Z_A CR LF - command understood and in progress
Z_^ CR LF command understood but zeroing range is exceeded
Z_A CR LF - command understood and in progress
Z_E CR LF time limit exceeded while waiting for stable measurement result
Z_I CR LF - command understood but not accessible at this moment
Tare Balance
Format: T CR LF
Response options:
T_A CR LF - command understood and in progress
T_D CR LF command carried out
T_A CR LF - command understood and in progress
T_v CR LF command understood but taring range is exceeded
T_A CR LF - command understood and in progress
T_E CR LF time limit exceeded while waiting for stable measurement result
T_I CR LF - command understood but not accessible at this moment
Give Tare Value
Format: OT CR LF
Response: OT_TARE CR LF - command carried out
Response format:
1 2 3 4-12 13 14 15 16 17 18 19
O T space tare space unit space CR LF
Tare - 9 characters, right justification
Unit - 3 characters, left justification
Caution:
Tare value is always given in calibration unit.
Set Tare
Format: UT_TARE CR LF , where TARE - tare value
Response options:
UT_OK CR LF - command carried out
UT_I CR LF - command understood but not accessible at this moment
ES CR LF - command not recognised (tare format incorrect)
Caution:
Use dot in tare format as decimal point.
Send Stable Measurement Result in Basic Measuring Unit
Format: S CR LF
Response options:
S_A CR LF - command understood and in progress
S_E CR LF time limit exceeded while waiting for stable measurement result