RADWAG PM 10.C32, User Manual

Page: 31 / 129

- 31 -
Tael Singapore [tls] no
* - units accessibility is conditioned by the weighing instrument type.
11.4. Weighing Units Accessibility
You can declare which units are to be accessible upon pressing key. Units with
parameter value set to <Yes > option are available for selection in particular working
modes, i.e. modes facilitating units change.
Units with parameter value set to <No
> option will not be accessible in the
course of the weighing instrument
operation.
11.5. Start Unit Selection
Upon setting start unit, the balance activates with the set start unit for these modes where
change of the unit is possible.
Accessibility of particular units is conditioned by the weighing instrument status; i.e. on the
fact whether the given balance is verified or not.
11.6. Gravitational Acceleration
<Gravitational acceleration> parameter compensates changes of gravity force being a
result of different latitude and altitude when the selected unit is „Newton” [N].
Procedure:
•
Enter <Units/Gravitational acceleration> submenu, <Gravitational acceleration> edit
box is displayed.
•
Enter gravitational acceleration value respective for the particular place of use and press
key to confirm changes.
11.7. Custom Units
Parameter allowing you to declare two custom units. Displayed custom unit value is a result
of calculation, where obtained in the course of measurement weight value is multiplied by a
multiplier determined for this particular custom unit. The custom units can be freely named