RADWAG PM 10.C32, User Manual

Page: 32 / 129

- 32 -
with use of 3 characters maximum. By default the custom units are marked as: [u1] –
custom unit 1 and [u2] – custom unit 2.
11.8. Zeroing Operation
To zero mass indication press key. Zero indication and the following pictograms are
displayed: and .
Zeroing operation means determining new zero point, recognized by the weighing device as
precise zero. The instrument can be zeroed only when the indication is stable.
Caution:
Indication can be zeroed only within ±2% range of maximum capacity. If the zeroed value is
above ±2% of the maximum capacity, then the software displays a respective error
message:
11.9. Taring Operation
To determine net weight value, load the weighing pan with a packaging, wait for a stable
indication and press key. Zero indication and the following pictograms are
displayed: Net and . Upon unloading the weighing pan, the sum of tared masses with
minus sign is displayed. You can assign tare value to a particular product stored in the
database. In such case the assigned tare value is automatically acquired upon selection of
the given product.
Caution: It is impossible to tare negative values. When you try to tare negative values, the
weighing instrument responds with an error message. In such case, zero the indication and
repeat taring procedure.
Entering tare value manually
Procedure:
•
Press quick access key - . The key is available regardless of the working mode you
operate.
•
An on-screen numeric keyboard is displayed.
•
Enter the tare value and press key.
•
Balance returns to the weighing mode. The entered tare value with ' - ' sign is displayed.
<Net> marker appears in the upper-left corner of the screen.
Deleting tare
The tare value indicated on the display can be deleted by pressing key located on
the operation panel. Before you do it make sure that the weighing pan is empty.