RADWAG PM 10.C32, User Manual

Page: 115 / 129

- 115 -
Lock Balance Keypad
Format: K1 CR LF
Response options:
K1_I CR LF - command understood but not accessible at this moment
K1_OK CR LF - command carried out
Command locks the balance keypad (proximity sensors, touch panel) until the moment of
turning the balance off or until sending K0 command.
Unlock Balance Keypad
Format: K0 CR LF
Response options:
K0_I CR LF - command understood but not accessible at this moment
K0_OK CR LF - command carried out
Give Available Working Modes
Command overview:
Command returns accessible working modes.
Format: OMI <CR><LF>
Response options:
OMI <CR><LF>
n_”Mode name” <CR><LF>
:
n_”Mode name” <CR><LF>
OK <CR><LF>
- command carried out, response: accessible working modes
OMI_I <CR><LF> - command understood but not accessible at this moment
Mode name – parameter, working mode name, inserted in between inverted comas. The
name takes form given on a particular balance display, it is provided in a currently selected
language.
n - parameter, decimal value determining working mode number.
n →
1 – Weighing
2 – Parts Counting
3 – Percent Weighing
4 – Dosing
5 – Formulations
6 – Animal Weighing
8 – Solids Density
9 – Liquids Density
10 – Peak Hold
12 – Checkweighing
13 – Statistics
21 – Basic Totalizing
Caution:
Working modes numbering is identical for each kind of balance or scale. The numbers are
assigned to working modes names.
Some balances give only the number as a response.
Example 1:
Command: OMI <CR><LF> - return accessible working modes
Response: OMI <CR><LF>
2_” Parts counting” <CR><LF>
4_” Dosing” <CR><LF>
- return accessible working modes,
mode name