RADWAG PM 10.C32, User Manual

Page: 47 / 129

- 47 -
14.6. Automatic Adjustment Time
<Automatic adjustment time> parameter determines time interval between successive
automatic internal adjustments. The time interval is declared in hours and ranges between
0.5 and 12 hours.
To set time interval for automatic adjustment:

select <Automatic adjustment time> option,

using displayed menu, select appropriate time interval (given in hours) which is to
elapse between the most recent adjustment and activation of the following automatic
internal adjustment.
Caution: This parameter settings can be modified only for balances that are not a subject to
the conformity assessment (verification).
14.7. Print
Adjustment report is automatically generated at the end of each adjustment process or
adjustment test, next it is sent to port selected for <PERIPHERALS/PRINTER> (COM 1 port
by default). To declare report content go to <PRINTOUTS/ADJUSTMENT REPORT>
submenu.
For instruction on how to declare adjustment report settings read section 'Printouts'.
The report can be printed using balance-connected printer or sent to a computer and saved
as a file for the archiving purposes.
15. PRINTOUTS CONTENT
15.1. Adjustment Report
ADJUSTMENT REPORT is a group of parameters allowing you to declare data that is to be
printed on an adjustment report.
Variable Description
PROJECT
Project name matching particular weighing type (31 characters
maximum).
ADJUSTMENT
TYPE
Performed adjustment type.
OPERATOR Logged-in operator name.
PROJECT Project name printout (see: Project parameter).
DATE
Adjustment performance date.
TIME Adjustment performance time.
BALANCE S/N Balance serial number.
ADJUSTMENT
RESULT
DIFFERENCE Difference between mass of adjustment weight that was measured
during last adjustment and mass of currently measured adjustment
weight.
DASHES Line separating data and signature fields on a printout.