- 97 -
3.
The system detects the new USB device and automatically starts searching for a
respective driver.
4.
Go to Device Manager and check number assigned to virtual COM port.
For this very case it is STMicroelectronics Virtual COM Port (COM8).
5.
Set balance parameters: select USB B value for COMPUTER/PORT parameter.
6.
Run software for measurements readout.
7.
Set communication parameters – select COM port that was installed in the course of
drivers installation (in this very case it is COM8).
8.
Start cooperation.
31.
PERIPHERAL DEVICES
PERIPHERALS menu is to be found in Parameters menu. It is accessed by pressing
button. The menu features list of devices that can cooperate with the balance.
31.1. Computer
Carry out configuration using <Computer> submenu.
Procedure:
•
Press
button, next press: <Peripherals / Computer>.
•
Set parameters related to cooperation with a computer.
•
Select computer port:
o
available options: none, COM 1, COM 2, USB B, Ethernet, wireless
communication, USB Free Link.
Caution: In order to set USB Free Link instead of USB B, select any other port (e.g. none,
COM1, etc.), and next select USB Free Link port. Analogously when changing USB Free
Link to USB B.
USB
FREE LINK
- USB port, type B, for connecting a computer. Tool for entering
data, it functions as a keyboard. Upon proper modification of non-standard printout
and sending proper command from the computer, or upon pressing ENTER key
located on the operation panel, the data from non-standard printout is entered
directly to computer programs, e.g. Excel, Word, Notepad etc.
Select <USB FREE LINK> port and configure its settings in order to enable correct
cooperation of the balance with computer programs:
SPREADSHEET - value YES - cooperation with Excel type program,
- value NO – cooperation with other programs,
Summary of Contents for PM 10.C32
