RADWAG PM 10.C32, User Manual

Page: 15 / 129

- 15 -
3.8. Connecting Additional Hardware
Use only accessories and peripheral equipment recommended by the manufacturer. The
balance must be disconnected from the mains before connecting or disconnecting any
peripherals (printer, PC computer, computer keyboard of USB type, additional display). Upon
connecting the peripherals, plug the balance to the mains.
4. START-UP
•
Connect the power supply to the mains. Plug it to the power supply socket.
•
The balance activates automatically, if not, press key , it is to be found on
the top of the operation panel.
•
Upon completed start-up, the home screen is displayed automatically.
•
The balance runs with no user logged in. In order to start operation it is necessary to
carry out the logging procedure (for detailed logging procedure read later sections of
this user manual).
Caution: Before you start the balance, make sure that there is no load on the weighing pan.
5. OPERATION PANEL
Keys:
Press to switch the display on/off. Upon switching the display
off, the other subassemblies remain powered and the weighing
instrument is ready for operation.
Press to enter the main menu.
Press to log in.
Press to cancel the message.
Press to zero the balance.
Press to tare the balance.