RADWAG PM 10.C32, User Manual

Page: 114 / 129

- 114 -
Format: RM_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
RM_OK CR LF - command carried out
RM_I CR LF
- command understood but not accessible at this moment (e.g. mode other
than PERCENT WEIGHING)
ES CR LF - command not recognised (mass format incorrect)
Value Release
Format: SS CR LF
Response options:
SS_OK CR LF - command understood and in progress
Command’s function is similar to function of PRINT key located on the instrument panel.
Internal Adjustment
Format: IC CR LF
Response options:
IC_A CR LF - command understood and in progress
IC_D CR LF - adjustment completed
IC_A CR LF - command understood and in progress
IC_E CR LF - time limit exceeded while waiting for a stable measurement result
IC_I CR LF - command understood but not accessible at this moment
Disable Automatic Internal Adjustment of the Balance
Format: IC1 CR LF
Response options:
IC1_I CR LF - command understood but not accessible at this moment
IC1_E CR LF - operation disabled, e.g. for verified balance
IC1_OK CR LF - command carried out
Operation is disabled for verified balances.
For non-verified balances the command disabled internal adjustment until it is enabled via
IC0 command or until the balance is turned off. The command does not modify settings
specifying adjustment start.
Enable Automatic Internal Adjustment of the Balance
Format: IC0 CR LF
Response options:
IC0_I CR LF - command understood but not accessible at this moment
IC0_OK CR LF - command carried out
Operation is disabled for verified balances.
Give Balance Serial Number
Format: NB CR LF
Response options:
NB_A_”x” CR LF - command understood, response: serial number
NB_I CR LF - command understood but not accessible at this moment
x - balance serial number (in between inverted commas)
Example:
Command: NB CR LF - return serial number
Response: NB_A_”1234567” - weighing device serial number –-”1234567”