RADWAG PM 10.C32, User Manual

Page: 35 / 129

- 35 -
11.11. WEIGHING Mode Settings- Readout
The software allows setup of operating parameters (filters, value release and autozero
function, deleting the last digit and other settings) separately for each working mode. As an
operator you can modify all profile settings only for
User profile, when it comes to the
remaining default profiles ( Fast, Fast dosing, Precision ) they can only be modified partially,
i.e. you are not allowed to change Filter and Value release parameters for these profiles,
the said parameters are set to default factory values.
It enables customizing the instrument and utilizing its properties depending on your needs
and expectations, or on specific requirements for selected working mode (e.g. DOSING); as
a result the device operation is quick and easy.
Setting filter level (option disabled for the following profiles: Fast, Fast dosing,
Precision)
Filter settings depend on the working environment. For the best possible conditions the filter
can work in a very fast mode (V.FAST value for Filter parameter); however, if the conditions
are poor (shakes, drafts), the filter should be set to slow or very slow option (SLOW or V.
SLOW value for Filter parameter). The effectiveness of the filter is different throughout the
weighing range. The filter works slower when the weight value of weighed mass is about to
be determined, it works more intensively when the weighed mass is within the set range of
the filter (parameter for setting filter range is accessible only from the service menu – the
user does not have any access to it).
Depending on the filter, the weighing time is shorter (V.FAST and FAST) or longer (SLOW
and V. SLOW).
Caution:
The higher filter level, the longer the weighing takes.
Value release (option disabled for the following profiles: Fast, Fast dosing, Precision)
Since ambient conditions at a workplace vary, it is necessary to determine the value release
parameter in the most preferable way enabling weighing instrument adaptation, parameter
options are:
FAST , FAST + RELIABLE or RELIABLE . Depending on the selected option,
weighing time is either shorter or longer.
Autozero function