RADWAG PM 10.C32, User Manual

Page: 113 / 129

- 113 -
Set Min Checkweighing Threshold
Format: DH_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
DH_OK CR LF - command carried out
ES CR LF - command not recognised (mass format incorrect)
Set Max Checkweighing Threshold
Format: UH_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
UH_OK CR LF - command carried out
ES CR LF - command not recognised (mass format incorrect)
Give Value of Min Checkweighing Threshold
Format: ODH CR LF
Response: DH_MASS CR LF - command carried out
Response format:
1 2 3 4-12 13 14 15 16 17 18 19
D H space mass space unit space CR LF
Mass - 9 characters, right justification
Unit - 3 characters, left justification
Give Value of Max Checkweighing Threshold
Format: OUH CR LF
Response: UH_MASS CR LF - command carried out
Response format:
1 2 3 4-12 13 14 15 16 17 18 19
U H space mass space unit space CR LF
Mass - 9 characters, right justification
Unit - 3 characters, left justification
Set Mass Value of a Single Item (for PARTS COUNTING mode only)
Format: SM_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
SM_OK CR LF - command carried out
SM_I CR LF
command understood but not accessible at this moment (e.g. other than
PARTS COUNTING mode operated)
ES CR LF - command not recognised (mass format incorrect)
Set Target Mass Value (e.g. DOSING mode)
Format: TV_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
TV_OK CR LF - command carried out
TV_I CR LF
- command understood but not accessible at this moment (e.g. mode other
than DOSING)
ES CR LF - command not recognised (mass format incorrect)
Set Reference Mass Value (e.g. for PERCENT WEIGHING)