RADWAG PM 10.C32, User Manual

Page: 59 / 129

- 59 -
Caution: It is necessary to tare any additional elements (packaging) prior to counting
process start.
With single part mass set, put parts to be counted into tare container weight of which has
been stored by balance memory.
Number of weighed pieces is displayed on a screen.
You can print stable measurement (stability pictogram displayed), to do it press
key.
18. CHECKWEIGHING
< Checkweighing> is a working mode using two thresholds (Min and Max) for control
of samples weight. Usually the weight is considered to be correct if it is comprised within
threshold values.
Procedure for activation of Checkweighing mode:
•
Select <Checkweighing> mode, the home screen is displayed automatically, wherein
the top bar of the screen features pictogram.
Info field provides the following
information:
•
Bar graph with checkweighing thresholds
•
Gross weight
•
Tare weight
•
Operator
•
Buttons: print header, print footer, set
checkweighing thresholds, product,
databases
18.1. Mode Related Settings
The supplementary settings enable you to adjust the working mode to your needs and
requirements.For means of operation of these functions read point 11
WEIGHING Mode
Settings . You can place the bar graph within information field area. Below the bar graph, Min
and Max threshold values are displayed.
18.2. Checkweighing – Quick Access Keys
Each working mode features automatically displayed set of default keys. The set can be
modified by assigning out-of-list quick access keys to the on-screen buttons. Such operation
requires particular permissions level. List of quick access keys it to be found in section 8 of
this user manual.