![background image](http://html2.mh-extra.com/html/quantum/superloader-3/superloader-3_user-manual_3481581075.webp)
Chapter 4 On-board Remote Management
Configurations Page
Quantum SuperLoader 3 User’s Guide
57
2
In the IP address fields, type the static IP address using the
<
Tab
>
key
to move from box to box.
3
If no check mark displays in the box next to
DHCP
, the static IP
address option is enabled. To change a static IP address, type in the
new address in the IP address fields using the
<
Tab
>
key to move
from box to box.
4
To change the IP address from a static address to a dynamic address,
click the box next to
DHCP
.
To
Set Network Configuration
:
1
To change the values of the subnet mask, gateway, Simple Network
Management Protocol (SNMP) server, or the time server, type in the
new address, using the
<
Tab
>
key to move from box to box.
2
Click
submit
.
Setting Security Options
4
When you enable the security option, users must enter a password to
access the autoloader's front panel functionality. A password allows
either administrator-level access or operator-level access (see
“Setting
Security”
on page 78). To set security:
1
From any page, click the
Configurations
heading.
The
Configurations
screen displays.
2
On the left-hand side of the screen, click
Security
. The
System
Security
section of the screen displays.
3
To enable front panel security, select the check box next to
Front Panel
Security Enabled
.
4
If the check box is blank, the security option for the front LCD panel
is not enabled.
5
Click
submit
.
To reset the front panel password:
1
From any page, click the
Configurations
heading.
The
Configurations
screen displays.
2
On the left-hand side of the screen, click
Security
.
3
Select the check box next to
Reset Front Panel Password
. A check
mark displays.