![background image](http://html2.mh-extra.com/html/quantum/superloader-3/superloader-3_user-manual_3481581050.webp)
Chapter 3 Operating the Autoloader
Using Cartridges
Quantum SuperLoader 3 User’s Guide
32
4
Once you have inserted the cartridge, press
Enter
.
5
Press
Exit
to clear the command and return to the menu.
To insert a cartridge into a magazine slot:
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2
From the
Commands
submenu, scroll to
Enter
, and then press
Enter
.
3
From the
Enter
submenu, scroll to
To Location
, and then press
Enter
.
The message
Insert Tape, Push Until Prompted
displays on the LCD.
4
Once you have inserted the cartridge, press
Enter
.
5
Press
Exit
to clear the command and return to the menu.
Note:
For the autoloader, push the cartridge in until it stops. The
cartridge will be about 3 inches (7.5 cm) inside the mailslot.
This may require that you push and have your fingers well
within the mailslot opening. After insertion, the end of the
cartridge will be visible at the back of the mailslot opening.
Note:
If the insert cartridge function fails, the cartridge ejects and
you will have to repeat steps
3
and
4
again. The message
Missed Tape
displays.
Note:
After
Insert Tape, Push Until Prompted
displays on the
LCD, insert the cartridge. After approximately 5 seconds,
the system automatically verifies that a cartridge is
inserted and continues the process. The message
T
ape
Loaded
displays when successfully completed.
Note:
For the autoloader, push the cartridge in until it stops. The
cartridge will be about 3 inches (7.5 cm) inside the
mailslot. This may require that you push and have your
fingers well within the mailslot opening. After insertion,
the end of the cartridge will be visible at the back of the
mailslot opening.
Note:
If the insert cartridge function fails, the cartridge ejects
and you will have to repeat steps
3
and
4
again. The
message
Missed Tape
displays.