Chapter 4 On-board Remote Management
On-board Remote Management Overview
Quantum SuperLoader 3 User’s Guide
48
options, networking options, security options, running diagnostic tests,
and performing system updates.
Opening On-board
Remote Management
4
On-board Remote Management has an HTML interface, which means
you use a browser to open it. The following Web browsers are supported:
• For Microsoft Windows—Microsoft Internet Explorer 5.5 or later
• For Microsoft Windows Server 2003—Microsoft Internet Explorer 6.0
or later (with latest security patches)
• For Redhat
®
2.1—Mozilla™ 1.4.2
• Firefox™ 1.0
You need an operator password to access the
Commands
page, and you
need an administrator password to access the
Configurations
,
Diagnostics
,
and
Updates
pages.
To open On-board Remote Management:
1
From your computer, open your Web browser.
2
In the browser's address field, enter the IP address for your
autoloader (see
“Viewing Ethernet Information”
on page 45).
Note:
Only use the
Diagnostic
command when the autoloader is
known to be idle and unavailable to host backup/restore
applications. Use of the
Diagnostic
commands from On-board
Remote Management should not be issued while the
autoloader is being used by host applications. The autoloader
will recognize when the drive or autoloader is executing host
commands and will respond appropriately to prevent
application failures. A
Diagnostic
command being issued
between host application commands may not be recognized
resulting in a failed application, such as a failed backup/
restore job.
Note:
To log out of the system, you must close your browser to end
the session.