Quantum Superloader 3 User Manual Download Page 32

Page: 32 / 210

Chapter 2 Installation and Configuration

Unpacking the Autoloader

Quantum SuperLoader 3 User’s Guide

Save the packing materials in case you need to move or ship the

autoloader in the future.

Accessories

The following accessories are shipped with the Quantum SuperLoader 3

autoloader with a SCSI, Fibre Channel, or SAS interface:

• Quantum SuperLoader 3 Quick Start Guide

• SCSI tape drive kits

• SCSI host or server cable
• SCSI terminator (not included with Serial Attached SCSI)

• Fibre Channel tape drive kits

• Fibre Channel cable

• Hardware to rack mount the autoloader
• T8 and T10 TORX

L-Key drivers

• One magazine blank
• Power cable
• Documentation CD containing all documentation in Adobe

Portable

Document Format (PDF)

• Bar code labels

Summary of Contents for Superloader 3



















































































































































































































Search results

Summary of Contents for Superloader 3

Reviews:

Related manuals for Superloader 3

Brands by name

Popular brands

Quantum Superloader 3, User Manual

Search results

Summary of Contents for Superloader 3

Reviews:

Related manuals for Superloader 3

Brands by name

Popular brands