Chapter 2 Installation and Configuration
Connecting Cables
Quantum SuperLoader 3 User’s Guide
21
During the power on self-test (POST), both LEDs are illuminated
briefly, followed by only the Ready/Activity LED flashing. When the
initialization sequence is complete, the LCD screen displays the
Home
screen.
Connecting SAS and
Power Cables
2
To connect the SAS and power cables to the autoloader, follow these
steps:
1
Attach one end of the SAS cable (included in the accessory kit) to the
SAS connector on the back panel of the autoloader (see
figure5
).
Figure 5 Cable Connectors
(SAS Tape Drive)
2
Attach the other end of the SAS cable to the SAS host.
3
Attach one end of your Ethernet cable to the Ethernet port on the
back panel of the autoloader for remote management.
4
Attach the other end of the Ethernet cable to your host network port
or router.
5
Attach the female connector of the power cable to the power
connector on the back panel of the autoloader (see
figure2
).
SAS cable
Ethernet cable
