![background image](http://html2.mh-extra.com/html/quantum/superloader-3/superloader-3_user-manual_3481581089.webp)
Chapter 5 Administration
Configuring the Autoloader
Quantum SuperLoader 3 User’s Guide
71
Fibre Channel Autoloader
5
If you have an autoloader with a Fibre Channel tape drive,
Fibre Channel
replaces
SCSI ID.
To set or change the Fibre Channel parameters:
1
If the main menu is not already visible, press
Enter
.
2
On the main menu, scroll to
Configuration
and press
Enter
.
3
On the
Configuration
submenu, scroll to
Fibre Channel
and press
Enter
.
4
Scroll to the parameter you want to set or change (
Set Topology
,
Set
FC Speed
, or
Set Loop ID
), then press
Enter
.
•
Set Topology
allows you select
Auto Negotiate
,
Loop
, or
P2P
.
•
Set FC Speed
allows you to select
Auto Negotiate
,
1 Gig
, or
2 Gig
.
•
Set Loop ID
allows you to select a
Loop ID
of
0 – 127
(only if
Loop
is selected with
Set Topology)
.
5
Press and hold the power button on the front panel when
Please
Cycle Power
displays on the LCD.
6
Power Off
displays on the LCD, then the autoloader shuts off.
7
Press the power button again to power on the autoloader.
The new Fibre Channel parameters are now in effect.
Note:
In a native Fibre Channel device, dynamic World Wide
Naming is supported.