Chapter 2 Installation and Configuration
Connecting Cables
Quantum SuperLoader 3 User’s Guide
22
6
Plug in the power cable to the nearest properly grounded power
outlet.
7
Turn on the autoloader by setting the power switch on the back
panel to the
ON
position. Turn on any other devices you turned off
earlier. Check the LCD screen to make sure the autoloader is
receiving power. If it is not, check the power connections and your
power source.
During the power on self-test (POST), both LEDs are illuminated
briefly, followed by only the Ready/Activity LED flashing. When the
initialization sequence is complete, the LCD screen displays the
Home
screen.
