Q2 Q2A, Technical Manual

Page: 725 / 866

Parameter
Details
12
12.7 H: TERMINALS
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual 725
Note:
•
The detection level set with L4-03 is a signed value. The drive will only detect in one direction.
• CLV and CLV/PM control use motor speed as the reference.
ON : The output frequency is less than the value of L4-03 or is not higher than the value of L4-03
+ L4-04 .
OFF : The output frequency is higher than the value of L4-03 + L4-04 .
Figure 12.94 Example of Frequency Detection 3 (value of L4-03 Is Positive)
Note:
Figure 12.94 shows the result of the configuration when L4-07 = 2 [SpAgree Det.Selection = Always Detect] . The default setting of L4-
07 is 1 [No Detect@BB] . When the speed agreement detection selection is
“
No Detection during Baseblock
”
, the terminal is deactivated
when the drive output stops.
■
16: FreqDetect 4
Setting Function Description
16 FreqDetect 4
The terminal activates when the output frequency is higher than the value of L4-03 [SpAgree Det.Level(+/-)]. After the terminal
activates, the terminal stays on until the output frequency is at the value of L4-03 - L4-04 .
Note:
•
The detection level set with L4-03 is a signed value. The drive will only detect in one direction.
• CLV control uses motor speed as the reference.
ON : The output frequency is higher than the value of L4-03 .
OFF : The output frequency is less than the value of “ L4-03 - L4-04 ”, or it is not higher than the
value of L4-03 .
Figure 12.95 Example of Frequency Detection 4 (value of L4-03 Is Positive)
■
17: @Fast Stop
Setting Function Description
17 @Fast Stop
The terminal activates when the fast stop is in operation.
■
18: @KEBridethru
Setting Function Description
18 @KEBridethru
The activates during KEB Ride-Thru.
Note:
Refer to “ KEB Ride-Thru function ” for more information.
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV