Q2 Q2A, Technical Manual

Page: 610 / 866

12.4 d: REFERENCE
610 SIEPYEUOQ2A01G AC Drive Q2A Technical Manual
Related Parameters
MultSpd Ref1
H1-xx = A
MultSpd Ref2
H1-xx = B
MultSpd Ref3
H1-xx = C
MultSpd Ref4
H1-xx = D
Jog Reference
H1-xx = 6
Reference 13 ( d1-13 )
OFF OFF ON ON OFF
Reference 14 ( d1-14 )
ON OFF ON ON OFF
Reference 15 ( d1-15 )
OFF ON ON ON OFF
Reference 16 ( d1-16 ) ON ON ON ON OFF
Jog Reference ( d1-17 )
*1
- - - - ON
*1 Jog Reference (JOG command) is more important than all other frequency references.
Figure 12.54 Time Chart for Multi-step Speed Reference/JOG Reference
■
d1-01 Reference 1
No.
(Hex.)
Name Description
Default
(Range)
d1-01
(0280)
RUN
Reference 1
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection] .
0.00 Hz
(0.00 - 590.00 Hz)
Note:
• The upper limit value changes when the E1-04 [Max Output Frequency] and d2-01 [FRef Upper Limit] values change. Calculate the
upper limit value with this formula:
Upper limit value = (
E1-04 ) × ( d2-01 ) / 100
• When A1-02 = 6, 7 [Control Method = PM AOLVector, PM CLVector] , the drive changes o1-03 = 1 [0.01% (100%=E1-04)] .
• To set d1-01 to 1-step speed parameter in a multi-step speed operation, set b1-01 = 0 [Freq. Ref. Sel. 1 = Keypad] .
■
d1-02 Reference 2
No.
(Hex.)
Name Description
Default
(Range)
d1-02
(0281)
RUN
Reference 2
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection] .
0.00 Hz
(0.00 - 590.00 Hz)
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV