Q2 Q2A, Technical Manual

Page: 709 / 866

Parameter
Details
12
12.7 H: TERMINALS
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual 709
Note:
Refer to Modbus communications “ Self-Diagnostics ” for the self-diagnostics procedure.
■
90 to 99: Q2pack DI1 to 10
Setting Function Description
90 to 99 Q2pack DI1 to 10
Sets digital inputs used with Q2pack. Refer to the Q2pack Online Manual for more information.
Note:
You cannot set values 90 to 99 for inverse output.
■
9F: Q2pack Disable
Setting Function Description
9F Q2pack Disable
Sets operation of the Q2pack program saved in the drive.
Note:
Set A1-07 = 2 [Q2pack Enable = With DI] to use this function.
ON : Disabled
OFF : Enabled
■
101 to 19F: Inverse Input of 1 to 9F
Setting Value Function Description
101 to 19F Inverse Input of 1 to 9F Sets the function of the selected MFDI to operate inversely. To select the function, enter “ 1xx ” , where the “ xx ” is the function
setting value.
For example, to use the inverse input of 46 [ASR I Reset] , set H1-xx = 146 .
Note:
You cannot use inverse input for all functions. Refer to Table 12.39 for more information.
◆
H2: DIGITAL OUTPUTS
■
Multi-Function Digital Outputs
H2 parameters set the MFDO terminal functions.
H2-01 Multi-Function Digital Output 1, H2-02 Multi-Function Digital Output 2, H2-03 Multi-Function Digital
Output 3
The drive has three MFDO terminals. Table 12.44 shows the default function settings for the terminals.
Table 12.44 MFDO Terminals Default Function Settings
No. Name Default Setting Function
H2-01 Multi-Function Digital Output 1 5 @Run
H2-02 Multi-Function Digital Output 2 7 Zero Speed
H2-03 Multi-Function Digital Output 3 F SpeedAgree1
Refer to Table 12.45 to set H2-xx [DO Function Select] .
Table 12.45 MFDO Setting Value
Setting Value Function
0
*1
Through Mode
1 Drive Ready
2 Drive Enable
3 Fault
4 Alarm
5 @Run
6 @Reverse
7 Zero Speed
Setting Value Function
8 ZeroServo ok
9 @Regeneration
A @SpeedLimit
B @FreqOutput
C @Standby
D LO/RE Status
E EDM Safety
F SpeedAgree1
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV