Pulsar FlowCERT LITE, Instruction Manual

Page: 23 / 150

Page
15
The unit is connected as follows:
Description Temperature
Sensor
FlowCERT
LITE
Power Supply Terminal 1 Terminal 29
Return Terminal 2 Terminal 28
Temp Source (P852), should be set to option 4 or 5 depending on the sensor
range, set 4 for type A and 5 for type B (see above), the range is specified on
the label of the sensor.
RS232 Serial Interface
If required, you can connect to the serial interface, to operate your
FlowCERT
LITE
remotely.
Voltage Selector and Fuse Location
The mains fuse is located, inside the terminal compartment, to the left of
the mains terminals, as illustrated below.