Pulsar FlowCERT LITE, Instruction Manual

Page: 113 / 150

Page
105
Bargraph
P829 Bargraph
By default the bargraph will be representative of the reading obtained, as
determined by the
Mode P100 . This parameter is automatically set to the
correct default option when selecting the Mode P100 and Xducer ( P101 ),
and under normal circumstances will not require changing.
The options, dependant on the value entered for Mode P100 , are as follows:
Option Description
1 = Level Bargraph will be r epresentative of level .
2 = Head (Default) Bargraph will be representative of head .
3 = Flow Bargraph will be representative of flow .
mA Output Parameters
Range
P830 mA Range
This parameter determines the range of the mA output, from the following.
Option Description
0= Off mA output disabled.
1= 0 to 20 mA mA output directly proportional to the mA mode
( P831 ), so if the reading is 0% the output is 0 mA. If
the reading is 100% the output is 20 mA.
2= 4 to 20 mA
(Default)
mA output directly proportional to the mA mode
( P831 ), so if the reading is 0% the output is 4 mA. If
the reading is 100% the output is 20 mA.
3= 20 to 0 mA mA output inversely proportional to the mA mode
( P831 ), so if the reading is 0% the output is 20 mA. If
the reading is 100% the output is 0 mA.
4= 20 to 4 mA mA output inversely proportional to the mA mode
( P831 ), so if the reading is 0% the output is 20 mA. If
the reading is 100% the output is 4 mA.