Prusa Research Original Prusa SL1, Manual

Page: 59 / 92

4. Electronics & Lid
Original Prusa SL1 kit assembly 59
STEP 14 Inserting the electronics holder
Slide the electronics holder in the printer.
Use the cutout in the lower part for all the cables laying on the bottom plate.
Make sure NO WIRE IS PINCHED!
First, ensure the electronics holder is all the way in, then tighten the screws, you
have inserted earlier.
Arrange the cables similarly to the picture to create a space for an easier
installation of the electronics.
STEP 15 Connecting both boards
Now, remove the boards from the ESD bags.
Remember to touch the boards only at the edges, avoid touching the chips or
capacitors .
Both boards have to be connected before assembling them to the printer.
Look for the connectors on both boards.
Carefully connect the boards together, make sure the pins are properly aligned.