Prusa Research Original Prusa SL1, Manual

Page: 9 / 92

1. Introduction
Original Prusa SL1 kit assembly 9
STEP 7 Unpacking the SL1 kit
The SL1 kit parts are separated into several layers of protective foam, which mostly
comply with the chapters. However, some parts had to be moved into different
layers due to their dimensions.
The manual will inform you, which layers are necessary for each chapter.
You can remove all parts from the protective foams, but:
Keep all electronics in the ESD bags until you have to mount or plug them to
the printer.
Make sure the print platform is protected from scratches. Place it on a soft
cloth.
Protect the acrylic lid against possible scratches.
To increase protection of the printer parts, the order of the foams was changed.
However, it doesn't affect the assembly procedure. Parts moved together with
foams.